SSM3A325BD Schneider Electric
SSM3A325BD Schneider Electric
Opis
solid state relay - DIN rail mount - input 4-32Vdc, output 48-600Vac, 25A
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Harmony Relay |
| Izdelek ali sestavni del | solid state relay |
| Kratko ime naprave | SSM3 |
| network number of phases | 3 phases |
| number of channels | 3 |
| Komplementarno | |
| mounting support | symmetrical DIN rail |
| Teža izdelka | 0.74 kg |
| Povezave - terminali | screw terminals: 0.2...1.3 mm², (AWG 24...AWG 16) for input screw terminals: 1.3...5.3 mm², (AWG 16...AWG 10) for output |
| local signalling | LED (green)input status: |
| tightening torque | 0.6...0.7 N.m for input 1.36...1.7 N.m for output |
| device presentation | complete product |
| contacts type and composition | 3 NO |
| [Uc] control circuit voltage | 4...32 V DC |
| output voltage | 48...600 V AC |
| maximum voltage drop | <1.35 V on-state |
| insulation resistance | 1000 MOhm |
| overvoltage category | III |
| response time | 0.5 cycle (turn-on) 0.5 cycle (turn-off) |
| absolute maximum voltage | 1100 V |
| surge current | 286 A for 20 ms at 50 Hz 300 A for 16.6 ms at 60 Hz |
| maximum leakage current | 0.25 mA off-state |
| switching voltage | 4 V DC turn-on 1 V DC turn-off |
| cos phi | 0.5-0.5 (with maximum load) |
| motor power hp | 1 hp 40 °C 240 V AC 2 hp 40 °C 380 V AC 3 hp 40 °C 480 V AC |
| maximum I²t for fusing | 410 A².s for 10 ms at 50 Hz 374 A².s for 8.3 ms at 60 Hz |
| load current | 0.1-25 A |
| dV/dt | 500 V/µs off-state at maximum voltage |
| solid state output type | zero voltage switching |
| capacitance unbalance | 8 pF for input/output |
| input current limits | 22-28 mA |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -20-80 °C |
| IP stopnja zaščite | IP20 |
| Stopnja onesnaženosti | 2 |
| Temperatura okoliškega zraka za skladiščenje | -40-100 °C |
| Certifikati izdelkov | CSA UL EAC |
| Standardi | CSA C22.2 No 14 IEC 60950-1 UL 508 |
| marking | EAC CSA UL CE |
| dielectric strength | 4 kV AC for input/output 4 kV AC for input or output to case |
