Menu
Vaša košarica

RM35TM50MW Schneider Electric

RM35TM50MW  Schneider Electric
RM35TM50MW Schneider Electric

Opis

motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO

Tehnične lastnosti

Glavno
Serija izdelkaZelio Control
Izdelek ali sestavni delmodular measurement and control relays
product specific applicationfor 3-phase supply
time delay typefixed 0.3 s
measurement range208...480 V voltage AC 0...20 Ohm short-circuit detection
switching capacity in VA1250 VA
relay nameRM35TM
relay typemotor temperature control relay
relay monitored parametersphase sequence motor temperature via PTC probe phase failure detection
Komplementarno
mounting support35 mm symmetrical DIN rail conforming to EN/IEC 60715
Teža izdelka0.13 kg
Povezave - terminaliscrew terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
[Ui] Nazivna izolacijska trdnost400 V conforming to IEC 60664-1
electrical durability10000 cycles
mechanical durability30000000 cycles
Kompatibilnostna kodaRM3
local signallingLED (green)power ON: LED (yellow)phase of relay (R2): LED (yellow)temperature of relay (R1):
Širina35 mm
tightening torque0.6-1 N.m conforming to IEC 60947-1
Omejitve napajalne napetosti20.4-264 V AC 20.4-264 V DC
operating positionany position without
[Uc] control circuit voltage<= 3.6 V of temperature control circuit (T1-T2 terminals open)
housing materialself-extinguishing plastic
OznačevanjeCE
insulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
power consumption in VA0-4 VA at 24...240 V AC
supply frequency50/60 Hz +/- 10 %
overvoltage categoryIII conforming to IEC 60664-1
maximum switching current5 A AC 5 A DC
response time> 50 ms (input Y1 (contact Y1-T1) and push-button)
minimum switching current10 mA at 5 V DC
resistance across terminals602 mOhm
maximum switching voltage250 V AC 250 V DC
maximum power consumption in W0.5 W DC
short-circuit current0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
utilisation categoryAC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1
nominal output current5 A
tripping threshold3100 Ohm +/- 10 % for temperature control circuit
voltage range176...528 V
reset time10000 ms output
operating rate<= 360 operations/hour full load
output contacts2 NO
run-up delay at power-up500 ms
control circuit frequency50...60 Hz +/- 10 %
measurement voltage limits176-528 V AC
reset threshold1650 Ohm +/- 10 % for temperature control circuit
maximum resistance1500 Ohm for temperature sensor at 20 °C
Okolje
Temperatura okoliškega zraka za delovanje-20-50 °C
IP stopnja zaščiteIP20 (terminals) conforming to IEC 60529 IP30 (casing) conforming to IEC 60529
Stopnja onesnaženosti3 conforming to IEC 60664-1
Temperatura okoliškega zraka za skladiščenje-40-70 °C
relative humidity95-95 % at 55-55 °C conforming to IEC 60068-2-30
Certifikati izdelkovGL UL GOST C-Tick CSA
StandardiEN/IEC 60255-6 IEC 60034-11-2
Odporno proti udarcu15 gn for 11 ms conforming to IEC 60255-21-1
Odpornost proti vibracijam0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Elektromagnetna kompatibilnostemission standard for industrial environments conforming to EN/IEC 61000-6-4 emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3 immunity for industrial environments conforming to EN/IEC 61000-6-2
directives73/23/EEC - low voltage directive 89/336/EEC - electromagnetic compatibility
non-dissipating shock wave4 kV
immunity to microbreaks20 ms at 20.4 V
dielectric test voltage2 kV, 1 min AC 50 Hz