LTMR100EFM Schneider Electric
LTMR100EFM Schneider Electric
Opis
motor controller LTMR TeSys T - 100..240 V AC 100 A for Ethernet TCP/IP
Tehnične lastnosti
| Glavno | |
| Izdelek ali sestavni del | motor controller |
| product name | TeSys T |
| Skupina izdelkov | TeSys |
| Aplikacija naprave | equipment monitoring and control |
| Kratko ime naprave | LTMR |
| [Us] Nazivna napajalna npetost | 100...240 V AC 50/60 Hz |
| communication port protocol | Modbus TCP/EtherNet/IP |
| supply voltage limits | 93.5-264 V AC |
| current consumption | 8...62.8 mA |
| bus type | Ethernet IEEE 802.3 interface, addressing 0...159, transmission rate 10...100 Mbit/s, RJ45 with 2 shielded twisted pairs |
| measurement current | 5-100 A |
| Komplementarno | |
| Višina | 61 mm |
| Teža izdelka | 0.53 kg |
| Povezave - terminali | control circuit: connector 1 cable(s) 0.25-2.5 mm² (AWG 24...AWG 14) flexible with cable end control circuit: connector 1 cable(s) 0.2-2.5 mm² (AWG 24...AWG 14) flexible without cable end control circuit: connector 1 cable(s) 0.25-2.5 mm² (AWG 24...AWG 14) flexible without cable end control circuit: connector 1 cable(s) 0.2-2.5 mm² (AWG 24...AWG 14) solid without cable end control circuit: connector 2 cable(s) 0.2-1 mm² (AWG 24...AWG 14) flexible with cable end control circuit: connector 2 cable(s) 0.2-1.5 mm² (AWG 24...AWG 14) flexible without cable end control circuit: connector 2 cable(s) 0.5-1.5 mm² (AWG 24...AWG 14) flexible without cable end control circuit: connector 2 cable(s) 0.2-1 mm² (AWG 24...AWG 14) solid without cable end |
| [Ui] Nazivna izolacijska trdnost | 690 V conforming to EN/IEC 60947-1 690 V conforming to CSA C22.2 No 14 690 V conforming to UL 508 |
| Kompatibilnostna koda | LTMR |
| [Uimp] rated impulse withstand voltage | 4 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1 6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1 0.8 kV communication circuit conforming to EN/IEC 60947-4-1 |
| Širina | 91 mm |
| Globina | 122.5 mm |
| tightening torque | control circuit: 0.5-0.6 N.m flat screwdriver 3 mm |
| protection type | reverse polarity protection overload phase unbalance overload (long time) thermal protection power factor variation thermal overload protection locked rotor earth-leakage protection load fluctuation phase failure |
| contacts type and composition | 1 NO + 1 NC fault signal 3 NO |
| connection pitch | 5.08 mm |
| maximum operating rate | 1800 cyc/h |
| input current | 3.1 mA at 100 V 7.5 mA at 240 V |
| overvoltage category | III |
| electromagnetic compatibility | electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5 control circuit: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3 fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4 voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11 conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6 temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5 temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5 |
| measurement accuracy | 5...15 % earth fault current internal measurement 1 % voltage (100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 temperature 5 % active and reactive power 0,02 current |
| pollution degree | 3 |
| associated fuse rating | 4 A gG for output 0.5 A gG for control circuit |
| web services | web server |
| short-circuit withstand | 100 kA conforming to EN/IEC 60947-4-1 |
| current state 1 guaranteed | logic input: 79...264 V and >= 2 mA for 25 ms |
| current state 0 guaranteed | logic input: 0...40 V and <= 15 mA for 25 ms |
| load current | 5 A at 250 V AC for logic output 5 A at 30 V DC for logic output |
| permissible power | 480 VA (AC-15), Ie = 2 A, 500000 cycles (output) 30 W (DC-13), Ie = 1.25 A, 500000 cycles (output) |
| network and machine diagnosis type | waiting time after overload tripping motor control command recording trip context information phase fault and earth fault trip counters starting current and time trip history information fault recording event recording remaining operating time before overload tripping running hours counter/operating time |
| logic input number | 6 |
| maximum operating frequency | 2 Hz |
| metering type | phase current I1, I2, I3 RMS temperature earth-fault current average current Iavg imbalance current |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -20-60 °C |
| IP stopnja zaščite | IP20 |
| Temperatura okoliškega zraka za skladiščenje | -40-80 °C |
| Nadmorska višina delovanja | <= 2000 m without derating |
| Certifikati izdelkov | C-Tick ABS UL DNV NOM RINA RMRoS BV LROS (Lloyds register of shipping) KERI EAC CCC CSA ATEX GL |
| Standardi | CSA C22.2 No 14 EN 60947-4-1 IACS E10 UL 508 IEC 60947-4-1 |
| Zaščitna obdelava | 12 x 24 hour cycles conforming to EN/IEC 60068-2-30 48 h conforming to EN/IEC 60070-2-11 TH conforming to EN/IEC 60068 |
| fire resistance | 650 °C conforming to EN/IEC 60695-2-12 960 °C conforming to UL 94 |
| mechanical robustness | vibrations mounted on symmetrical rail: 1 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6 vibrations plate mounted: 4 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6 shocks half sine wave acceleration: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27 |
