XACD24P2231 Schneider Electric
XACD24P2231 Schneider Electric
Opis
pendant station XAC-D - 1 rocker lever 1 Emergency stop
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Harmony XAC |
| Izdelek ali sestavni del | pendant control station |
| Kratko ime naprave | XACD |
| Komplementarno | |
| Teža izdelka | 0.42 kg |
| Povezave - terminali | screw clamp terminals, 1 x 2.5 mm² with or without cable end screw clamp terminals, 2 x 1.5 mm² with or without cable end |
| control type | intuitive |
| [Ui] Nazivna izolacijska trdnost | 500 V (pollution degree 3) conforming to IEC 60947-1 emergency stop contact: 400 V (pollution degree 3) |
| electrical durability | 1000000 cycles AC-3, 1100 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A 1000000 cycles AC-4, 1100 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A |
| mechanical durability | 3000000 cycles |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 4 kV emergency stop contact |
| standards | EN/IEC 60204-32 UL 508 EN/IEC 60947-5-1 EN/ISO 13850: 2006 CSA C22.2 No 14 EN/IEC 60947-5-5 |
| terminals description ISO n°1 | (1-2)P (11-12)P (9-10)P (7-8)P (R1-R2)RP (3-4)P (R3-R4)RP (5-6)P |
| product compatibility | XEDS2231 for reversing operation XENT1991 for emergency stop |
| cable entry | rubber sleeve with stepped entry 7-18 mm |
| short-circuit protection | 6 A fuse protection by cartridge fuse type aM |
| contact operation | snap action |
| [Ithe] conventional enclosed thermal current | 10 A XENT.... 16 A XEDS.... |
| terminals description ISO n°2 | (31-32)NC (11-12)NC (21-22)NC |
| enclosure material | polypropylene |
| ambient air temperature for operation | -25-70 °C |
| overvoltage category | class II conforming to IEC 61140 |
| IP degree of protection | IP65 conforming to IEC 60529 |
| IK degree of protection | IK08 conforming to EN 50102 |
| ambient air temperature for storage | -40-70 °C |
| motor starter type | reversing |
| shock resistance | 70 gn conforming to IEC 60068-2-27 |
| operating force | 31-31 N |
| protective treatment | TH |
| rated operational power in W | 1100 W AC-3 at 400 V conforming to IEC 60947-3 appendix A 1100 W AC-4 at 400 V conforming to IEC 60947-3 appendix A 3000 W AC-23B at 400 V |
| control station application | control of 2-speed hoist motor |
| terminal identifier | (13-14)NO (11-12)NC |
| control station composition | 1 2-directional button + 1 emergency stop |
| mechanical interlocking | with mechanical interlocking |
| control station colour | yellow |
| control button type | emergency stop push-button Ø 30 mm 3 NC trigger action first direction button 2-pole raise, slow-fast second direction button 2-pole lower, slow-fast |
| electrical circuit type | power circuit |
| enclosure type | complete ready for use |
| vibration resistance | 15 gn (f= 10-500 Hz) conforming to IEC 60068-2-6 |
| control station type | double insulated |
