XACB881 Schneider
XACB881 Schneider
Opis
pendant control station XAC-B - 8 pushbuttons
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Harmony XAC |
| Izdelek ali sestavni del | pendant control station |
| Kratko ime naprave | XACB |
| Komplementarno | |
| Teža izdelka | 1.55 kg |
| Povezave - terminali | screw clamp terminals, 1 x 2.5 mm² with or without cable end screw clamp terminals, 2 x 1.5 mm² with or without cable end |
| [Ui] Nazivna izolacijska trdnost | 500 V (pollution degree 3) conforming to IEC 60947-1 |
| mechanical durability | 1000000 cycles |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 |
| product certifications | CSA 300V type 4 |
| standards | CSA C22.2 No 14 EN/IEC 60204-32 EN/IEC 60947-5-1 |
| terminals description ISO n°1 | (1-2-3-4)OC |
| product compatibility | XESB2011 for reversing operation |
| cable entry | rubber sleeve with stepped entry 10-22 mm |
| short-circuit protection | 10 A fuse protection by cartridge fuse type gG |
| contact operation | snap action |
| [Ithe] conventional enclosed thermal current | 10 A |
| maximum resistance across terminals | 25 MOhm |
| contact code designation | A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A |
| enclosure material | glass reinforced polyester |
| ambient air temperature for operation | -25-70 °C |
| overvoltage category | class II |
| IP degree of protection | IP65 conforming to IEC 60529 |
| IK degree of protection | IK08 conforming to EN 50102 |
| ambient air temperature for storage | -40-70 °C |
| shock resistance | 100 gn conforming to IEC 60068-2-27 |
| operating force | 7-7 N push-button |
| protective treatment | TH |
| rated operational power in W | 140 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 140 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 95 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C |
| control station application | control of single speed hoist motor |
| terminal identifier | (11-12)NC (13-14)NO |
| control station composition | 8 push-buttons |
| mechanical interlocking | without mechanical interlock |
| control station colour | yellow |
| control button type | first push-button raise, slow second push-button lower, slow fourth push-button left, slow third push-button right, slow fifth push-button forward slow sixth push-button reverse, slow eighth push-button O seventh push-button I |
| electrical circuit type | control circuit |
| enclosure type | complete ready for use |
| vibration resistance | 15 gn (f= 10-500 Hz) conforming to IEC 60068-2-6 |
| control station type | double insulated |
| rated operational power in VA | 100 VA AC-15 for 1000000 cycles, operating rate <60 cyc/mn at 48 V 50/60 Hz, load factor = 0.5 (inductive load) 450 VA AC-15 for 1000000 cycles, operating rate <60 cyc/mn at 127 V 50/60 Hz, load factor = 0.5 (inductive load) 50 VA AC-15 for 1000000 cycles, operating rate <60 cyc/mn at 24 V 50/60 Hz, load factor = 0.5 (inductive load) 750 VA AC-15 for 1000000 cycles, operating rate <60 cyc/mn at 230 V 50/60 Hz, load factor = 0.5 (inductive load) |
