K2H004PLH Schneider Electric
K2H004PLH Schneider Electric
Opis
cam switch - 20 A - front mounting - 1 - 0 - 2 black marking
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Harmony K |
| Izdelek ali sestavni del | complete cam switch |
| IP degree of protection | IP40 conforming to IEC 529 IP40 conforming to NF C 20-010 |
| fixing mode | multifixing |
| Lokacija montaže | front |
| component name | K2 |
| [Ith] conventional free air thermal current | 20 A |
| cam switch function | 2-speed motor pole change switch |
| switching positions | 0-60°-120° |
| off position | with Off position |
| presentation of legend | with metallic legend, 1 - 0 - 2 black marking |
| motor type | tapped Dahlander winding |
| Komplementarno | |
| [Ui] Nazivna izolacijska trdnost | 690 V (pollution degree 3) conforming to IEC 60947-1 |
| electrical durability | 200000 cycles AC-23 200000 cycles AC-3 600000 cycles AC-15 600000 cycles AC-21 |
| mechanical durability | 1000000 cycles |
| Kompatibilnostna koda | K2H |
| [Uimp] rated impulse withstand voltage | 4 kV in isolating function 6 kV conforming to IEC 947-1 |
| short-circuit protection | 20 A cartridge fuse, type gG |
| positive opening | with |
| contact operation | slow-break |
| electrical connection | captive screw clamp terminals flexible, clamping capacity: 2 x 1.5 mm² captive screw clamp terminals solid, clamping capacity: 1 x 2.5 mm² |
| maximum operating rate | 2.5 cyc/mn AC-21 2.5 cyc/mn AC-23 2.5 cyc/mn AC-3 8.333 cyc/mn AC-15 |
| [Ithe] conventional enclosed thermal current | 16 A |
| short-circuit current | 10000 A |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -25-55 °C |
| Temperatura okoliškega zraka za skladiščenje | -40-70 °C |
| overvoltage category | class II conforming to IEC 536 class II conforming to NF C 20-030 |
| Certifikati izdelkov | CSA 240 V 3 hp 3 phases 2 -pole(s) UL 240 V 0.33 hp 1 phase 2 -pole(s) CSA 240 V 1 hp 1 phase UL 240 V 1 hp 3 phases |
| Standardi | EN 60947-3 for power circuit EN 60947-5-1 for control circuit IEC 60947-3 for power circuit IEC 60947-5-1 for control circuit CENELEC EN 50013 |
| Odporno proti udarcu | 30 gn conforming to IEC 68-2-27 |
| Odpornost proti vibracijam | 5 gn conforming to IEC 68-2-6 (f = 10-150 Hz) |
| Zaščitna obdelava | TC |
