BMH1003P16A2A Schneider Electric
BMH1003P16A2A Schneider Electric
Opis
servo motor BMH - 8.4 Nm - 6000 rpm - keyed shaft - without brake - IP54
Tehnične lastnosti
| Glavno | |
| Izdelek ali sestavni del | servo motor |
| Kratko ime naprave | BMH |
| Združljivost izdelkov | LXM32.D30N4 at 400...480 V three phase |
| IP degree of protection | IP54 standard |
| electrical connection | rotatable right-angled connectors |
| nominal output power | 2700 W for LXM32.D30N4 at 10 A, 400 V, three phase 2700 W for LXM32.D30N4 at 10 A, 480 V, three phase |
| mounting support | international standard flange |
| maximum mechanical speed | 6000 rpm |
| holding brake | without |
| speed feedback resolution | 32768 points/turn |
| peak stall torque | 25.1 N.m for LXM32.D30N4 at 10 A, 400 V, three phase 25.1 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| shaft end | keyed |
| nominal speed | 4000 rpm for LXM32.D30N4 at 10 A, 400 V, three phase 4000 rpm for LXM32.D30N4 at 10 A, 480 V, three phase |
| nominal torque | 6.2 N.m for LXM32.D30N4 at 10 A, 400 V, three phase 6.2 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| continuous stall torque | 8.4 N.m for LXM32.D30N4 at 10 A, 400 V, three phase 8.4 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| Komplementarno | |
| Teža izdelka | 6.5 kg |
| [Us] rated supply voltage | 480 V |
| length | 192.6 mm |
| network number of phases | three phase 3 |
| type of cooling | natural convection |
| range compatibility | Lexium 32 |
| shaft diameter | 19 mm |
| maximum current Irms | 29.1 A for LXM32.D30N4 |
| maximum permanent current | 29.1 A |
| circle diameter of the mounting holes | 115 mm |
| number of motor stacks | 3 |
| rotor inertia | 9.37 kg.cm² |
| centring collar depth | 3.5 mm |
| second shaft | without second shaft end |
| shaft length | 40 mm |
| centring collar diameter | 95 mm |
| motor flange size | 100 mm |
| number of mounting holes | 4 |
| mounting holes diameter | 9 mm |
| maximum radial force Fr | 1050 N at 1000 rpm 830 N at 2000 rpm 730 N at 3000 rpm 660 N at 4000 rpm 610 N at 5000 rpm |
| sizing reference | BMH1003P |
| accuracy error [angular] | 4.8 ° |
| coefficient 2_1 | 8.3922538504491E-5 N.m/rpm |
| coefficient 1_3 | 4.97545162490153E-10 N.m/rpm3 |
| coefficient 1_1 | -2.861662115237E-4 N.m/rpm |
| coefficient 1_2 | -4.75591811008787E-7 N.m/rpm² |
| maximum axial force Fa | 0.2 x Fr |
| continuous power | 3.3 W |
| temperature magnet hot | 100 °C |
| saturation coefficient 2 | -0.008682328907048 |
| saturation coefficient 3 | -3.881898687E-19 |
| saturation coefficient 1 | 8.9283669812E-18 |
| stator electrical time constant | 6.3 ms at 20 °C |
| number of motor poles | 10 |
| back emf constant | 63.5 V/krpm at 120 °C |
| stator inductance | 4 mH at 20 °C |
| feedback type | single turn SinCos Hiperface |
| stator resistance | 0.63 Ohm at 20 °C |
| continuous stall current | 7.69 A |
| motor voltage drop coefficient | 1 |
| temperature magnet rt | 20 °C |
| coefficient 1_5 | 4.02682466052377E-17 N.m/rpm5 |
| coefficient 1_6 | -2.68454977370236E-21 N.m/rpm6 |
| coefficient 1_4 | -2.17538877103337E-13 N.m/rpm4 |
| torque constant | 1 N.m/A at 120 °C |
| temperature copper hot | 135 °C |
| key width | 30 mm |
