SD326RU68S2 Schneider Electric
SD326RU68S2 Schneider Electric
Opis
motion control stepper motor drive - SD326 - pulse/direction -
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Lexium SD3 |
| Izdelek ali sestavni del | motion stepper drive |
| Kratko ime naprave | SD326 |
| supply voltage limits | 100-120 V 200-240 V |
| Komplementarno | |
| Višina | 145 mm |
| Teža izdelka | 1.2 kg |
| Kompatibilnostna koda | SD326 |
| Širina | 72 mm |
| Globina | 140 mm |
| [Us] rated supply voltage | 100...120 V - 15...10 % 200...230 V - 15...10 % |
| Poraba toka | <= 0.2 mA 24 V control voltage |
| output voltage | <= 30 V (24 V output signals) 4.75...5.25 V (ENC+5V_OUT signal output) |
| maximum voltage drop | <1 V 50 mA load for 24 V output signals <1 V 50 mA load for ENC+5V_OUT signal output <1 V 50 mA load for readiness signal output |
| maximum motor phase current | 6.8 A |
| supply voltage type | AC/DC |
| input current | 25 mA for 5 V optocoupler input signals 7 mA for 24 V optocoupler input signals |
| residual ripple | <= 5 % (24 V control voltage) |
| network number of phases | single phase 1 |
| voltage state 0 guaranteed | <= 5 V for 24 V optocoupler input signals <= 0.5 V for 5 V optocoupler input signals |
| voltage state 1 guaranteed | 15...30 V for 24 V optocoupler input signals 2.5...5.25 V for 5 V optocoupler input signals |
| type of cooling | fan |
| input voltage | 24 V -15 %/+20 % for 24 V control voltage |
| inrush current | 60 A |
| function available | rotation monitoring holding brake monitoring |
| overvoltage category | III |
| maximum switching current | 200 mA (readiness signal output) 50 mA (24 V output signals)RM-FAULT_OUT 1.7 mA (24 V output signals)+BRAKE_OUT |
| physical interface | RS422 - ENC_A/ENC_B signal input |
| maximum leakage current | 30 mA IEC 60990-3 |
| maximum switching voltage | 30 V DC (readiness signal output) |
| associated fuse rating | 10 A at 115 V 6 A at 230 V |
| maximum mechanical speed | 3000 rpm |
| format of the drive | block |
| shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| communication interface | pulse/direction, integrated |
| maximum input frequency | 200 kHz for 24 V optocoupler input signals 200 kHz for 5 V optocoupler input signals 400 kHz for ENC_A/ENC_B signal input |
| short-circuit current | 0.5 kA |
| supply voltage description | single phase 115 V single phase 230 V |
| network frequency limits | 50-60 Hz (- 15...10 %) |
| nominal power | 280 W at 115 V 420 W at 230 V |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | 0-40 °C conforming to UL 0-50 °C |
| IP stopnja zaščite | IP20 on upper part: IP40 (without removal of protective film) |
| Stopnja onesnaženosti | level 2 |
| Temperatura okoliškega zraka za skladiščenje | -25-70 °C |
| relative humidity | 5-85 % without condensation |
| Nadmorska višina delovanja | <= 1000 m without > 1000...< 2000 m without (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm) |
| Certifikati izdelkov | UL cUL |
| Standardi | EN/IEC 61800-3 environment 1 EN/IEC 61800-5-1 EN/IEC 61800-3 EN/IEC 61800-3 environment 2 EN/IEC 50178 |
| Odpornost proti vibracijam | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| Elektromagnetna kompatibilnost | electrostatic discharge level 3 conforming to EN/IEC 61000-4-2 immunity to electrical transients level 4 conforming to EN/IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 conforming to EN/IEC 61000-4-3 voltage/current impulse level 3 conforming to EN/IEC 61000-4-5 |
| marking | CE |
