LXM32CD18M2 Schneider Electric
LXM32CD18M2 Schneider Electric
Opis
motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Lexium 32 |
| Izdelek ali sestavni del | motion servo drive |
| Kratko ime naprave | LXM32C |
| [Us] Nazivna napajalna npetost | 100...120 V - 15...10 % 200...240 V - 15...10 % |
| network frequency | 47.5...63 Hz |
| network number of phases | single phase |
| line current | 9.9 A 74 % at 115 V, with external line choke of 2 mH 10.6 A 93 % at 230 V, with external line choke of 2 mH 8.5 A 147 % at 115 V, without line choke 8.4 A 148 % at 230 V, without line choke |
| EMC filter | integrated |
| continuous output current | 6 A at 8 kHz |
| supply frequency | 50/60 Hz - 5...5 % |
| supply voltage limits | 170-264 V 85-132 V |
| format of the drive | book |
| continuous power | 500 W at 115 V 1600 W at 230 V |
| output current 3s peak | 10 A at 115 V for 5 s 18 A at 230 V for 5 s |
| nominal power | 0.5 kW at 115 V 8 kHz 1 kW at 230 V 8 kHz |
| Komplementarno | |
| Višina | 270 mm |
| Teža izdelka | 1.8 kg |
| Kompatibilnostna koda | LXM32C |
| Širina | 48 mm |
| Globina | 237 mm |
| tightening torque | CN8: 0.5-0.5 N.m CN1: 0.7-0.7 N.m CN10: 0.7-0.7 N.m |
| product compatibility | servo motor BMH (70 mm, 1 motor stacks) servo motor BMH (70 mm, 2 motor stacks) servo motor BMH (100 mm, 1 motor stacks) servo motor BSH (70 mm, 1 motor stacks) servo motor BSH (70 mm, 2 motor stacks) servo motor BMH (70 mm, 3 motor stacks) servo motor BSH (55 mm, 3 motor stacks) servo motor BSH (70 mm, 3 motor stacks) servo motor BSH (100 mm, 1 motor stacks) |
| protection type | against reverse polarity: inputs signal against short-circuits: outputs signal |
| operating position | vertical +/- 10 degree |
| control signal type | servo motor encoder feedback pulse train output (PTO) RS422 <500 kHz <100 m pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m pulse/direction (P/D), A/B, CW/CCW RS422 <1000 kHz <100 m |
| output voltage | <= power supply voltage |
| electrical connection | terminal, clamping capacity: 3 mm², AWG 12 (CN8) terminal, clamping capacity: 5 mm², AWG 10 (CN1) terminal, clamping capacity: 5 mm², AWG 10 (CN10) |
| Označevanje | CE |
| network number of phases | 1 |
| transmission rate | 9600, 19200, 38400 bps for bus length of 40-40 m for Modbus |
| type of cable | single-strand IEC cable (temperature: 50-50 °C) copper 90 °C XLPE/EPR |
| switching frequency | 8 kHz |
| status LED | 1 LED (red)servo drive voltage: |
| safety level | SIL 3 conforming to EN/IEC 61508 PL = e conforming to ISO 13849-1 |
| overvoltage category | III |
| response time on output | 250 µs (DO) for discrete output(s) |
| discrete output type | logic output(s) (DO)24 V DC |
| response time | <= 5 ms compliment of STO_A, compliment of STO_B |
| discrete input logic | positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1 positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| physical interface | 2-wire RS485 multidrop for Modbus |
| connector type | RJ45 (labelled CN7) for Modbus |
| analogue input number | 2 |
| discrete output number | 5 |
| discrete input number | 2 safety discrete input(s) 6 logic discrete input(s) |
| linearity error | < +/- 0.1 % |
| number of addresses | 1-247 for Modbus |
| discrete input type | logic (DI terminals) safety (compliment of STO_A, compliment of STO_B terminals) |
| analogue input type | ANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 20 Ohm, resolution: 14 bits |
| sampling duration | ANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog DI: 0.25 ms discrete |
| discrete output logic | positive or negative (DO) conforming to EN/IEC 61131-2 |
| maximum leakage current | 30 mA |
| signalling function | display of faults 7 segments |
| communication interface | Modbus, integrated |
| supply voltage description | single phase 230 V single phase 115 V |
| contact bounce time | <= 1 ms for compliment of STO_A, compliment of STO_B 0.25 µs...1.5 ms for DI |
| discrete input voltage | 24 V DC for logic 24 V DC for safety |
| discrete output voltage | <= 30 V DC |
| safety function | STO (safe torque off), integrated |
| emc filter compatibility | type 021 |
| absolute accuracy error | < +/- 0.5 % |
| continuous output current 2 | 6 A |
| continuous output current 3 | 6 A |
| electrical isolation | between power and control |
| output current 3s peak 2 | 10 A at 115 V 18 A at 230 V |
| number of inputs/outputs | 6 DI + 5 DO + 2 AI |
| output current 3s peak 3 | 10 A at 115 V 18 A at 230 V |
| braking current | 50 mA |
| communication iinterface | pulse train |
| field weakening | false |
| switching frequency 2 | 8 kHz |
| switching frequency 3 | 8 kHz |
| drive voltage drop coefficient | 0.9 |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | 0-50 °C conforming to UL |
| IP stopnja zaščite | IP20 conforming to EN/IEC 60529 IP20 conforming to EN/IEC 61800-5-1 |
| Stopnja onesnaženosti | 2 conforming to EN/IEC 61800-5-1 |
| Temperatura okoliškega zraka za skladiščenje | -25-70 °C |
| relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Nadmorska višina delovanja | <= 1000 m without > 1000...3000 m with conditions |
| Certifikati izdelkov | UL TÜV RoHS CSA |
| Standardi | EN/IEC 61800-5-1 EN/IEC 61800-3 |
| Odporno proti udarcu | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
| Odpornost proti vibracijam | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| Elektromagnetna kompatibilnost | conducted EMC, class A group 1 conforming to EN 55011 radiated EMC, class A group 2 conforming to EN 55011 radiated EMC, category C3 conforming to EN/IEC 61800-3 conducted EMC, class A group 2 conforming to EN 55011 conducted EMC, environment 2 category C3 conforming to EN/IEC 61800-3 conducted EMC, category C2 conforming to EN/IEC 61800-3 conducted EMC, environments 1 and 2 conforming to EN/IEC 61800-3 electrostatic discharge immunity test, level 3 conforming to EN/IEC 61000-4-2 susceptibility to electromagnetic fields, level 3 conforming to EN/IEC 61000-4-3 1.2/50 µs shock waves immunity test, level 3 conforming to EN/IEC 61000-4-5 electrical fast transient/burst immunity test, level 4 conforming to EN/IEC 61000-4-4 |
| environmental characteristic | classes 3C1 conforming to IEC 60721-3-3 |
| type of cooling | integrated fan |
