ILE1F661PB1A2 Schneider Electric
ILE1F661PB1A2 Schneider Electric
Opis
brushless dc motor 24..36 V - CANopen DS301 interface - L = 174 mm - 38:1
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Lexium integrated drive |
| network type | DC |
| Izdelek ali sestavni del | motion integrated drive |
| Kratko ime naprave | ILE |
| [Us] Nazivna napajalna npetost | 24 V 36 V |
| length | 174 mm |
| communication interface | CANopen DS301, integrated |
| electrical connection | printed circuit board connector |
| network number of phases | single phase |
| motor type | brushless dc motor |
| number of motor poles | 6 |
| holding brake | without |
| nominal speed | 107 rpm at 24 V 128 rpm at 36 V |
| nominal torque | 5.8 N.m at 24 V 6 N.m at 36 V |
| reduction ratio | 38:1 (75:2) |
| winding type | medium speed of rotation and medium torque |
| gear box type | straight teeth gear, 3 stages |
| Komplementarno | |
| mounting support | flange |
| Teža izdelka | 1.85 kg |
| Kompatibilnostna koda | ILE |
| Poraba toka | 7000 mA peak 5500 mA maximum continuous |
| Omejitve napajalne napetosti | 18-40 V |
| protection type | safe torque off overload of output voltage short circuit of the output voltage |
| Označevanje | CE |
| network number of phases | 1 |
| voltage state 0 guaranteed | -3...4.5 V |
| voltage state 1 guaranteed | 15...30 V |
| transmission rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| type of cooling | natural convection |
| shaft diameter | 10 mm |
| reduction ratio | 38 |
| maximum switching current | 100 mA per output 200 mA total |
| associated fuse rating | 10 A |
| service life in hours | 2500 h bearing short-term operation 15000 h bearing long-term operation |
| nominal output power | 65 W at 24 V 81 W at 36 V |
| maximum mechanical speed | 133 rpm |
| supply voltage description | single phase 24 V DC single phase 36 V DC |
| discrete input current | 10-10 mA at 24 V on/STO_A for safety input 3-3 mA at 24 V on/STO_B for safety input 2-2 mA at 24 V for 24 V signal interface |
| discrete output voltage | 23...25 V |
| maximum supply current | 0.06 A at 36 V (power stage disabled) 0.1 A at 24 V (power stage disabled) 4 A at 24 V 3.4 A at 36 V |
| input/output type | 4 signals (each be used as input or output) |
| circle diameter of the mounting holes | 73.54 mm |
| number of motor stacks | 1 |
| rotor inertia | 211 kg.cm² |
| centring collar depth | 4 mm |
| second shaft | without second shaft end |
| shaft length | 25 mm |
| centring collar diameter | 16 mm |
| motor flange size | 66 mm |
| number of mounting holes | 4 |
| mounting holes diameter | 4.4 mm |
| shaft end | keyed |
| coefficient M0 | 0.015 N.m/rpm |
| voltage 1 speed 1 max | 89.334 rpm |
| maximum radial force Fr | 200 N (long-term operation) 200 N (short-term operation) |
| continuous stall torque | 8.2 N.m |
| voltage 2 speed 2 max | 89.334 rpm |
| sizing reference | ILE1_661_A2 |
| curve type | lin |
| peak stall torque | 10.94 N.m at 36 V 7.9 N.m at 24 V |
| accuracy error [angular] | 1 ° |
| voltage 2 | 36 V |
| voltage 1 | 24 V |
| coefficient 2_0 | 8.2 N.m |
| coefficient 2_1 | -0.015 N.m/rpm |
| voltage 1 speed 1 | 89.333 rpm |
| voltage 2 speed 2 | 89.333 rpm |
| accuracy error | +/- 1 point |
| coefficient 1_1 | -0.065 N.m/rpm |
| coefficient 1_0 | 12.666 N.m |
| maximum axial force Fa | 10 N (long-term operation) 80 N (short-term operation) |
| coefficient M0 max | 0.015 N.m/rpm |
| speed feedback resolution | 12 points/turn motor 0.8° gearbox output |
| feedback type | BLDC encoder |
| maximum torsional backlash | 1 ° |
| key width | 16 mm |
| detent torque | 3 N.m |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | 50-65 °C (with power derating of 2 % per °C) 0-50 °C (without) |
| IP stopnja zaščite | IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5 |
| Temperatura okoliškega zraka za skladiščenje | -25-70 °C |
| relative humidity | 15-85 % without condensation |
| Nadmorska višina delovanja | <= 1000 m without |
| Certifikati izdelkov | cUL TÜV UL |
| Standardi | EN/IEC 50178 EN/IEC 61800-3 IEC 60072-1 EN 61800-3:2001, second environment EN 50347 IEC 61800-3, Ed 2 EN 61800-3 : 2001-02 |
| Odporno proti udarcu | 150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29 |
| Odpornost proti vibracijam | 20 m/s² (f= 10-500 Hz) 10 cycles conforming to EN/IEC 60068-2-6 |
| Dovoljena temperatura okoliškega zraka okoli naprave | 105 °C power amplifier 110 °C motor |
