BMH0701T01F1A Schneider Electric
BMH0701T01F1A Schneider Electric
Opis
servo motor BMH - 1.4 Nm - 8000 rpm - untapped shaft - with brake - IP54
Tehnične lastnosti
| Glavno | |
| Izdelek ali sestavni del | servo motor |
| Kratko ime naprave | BMH |
| Združljivost izdelkov | LXM32.D18M2 at 115 V single phase LXM32.U90M2 at 230 V single phase |
| IP degree of protection | IP54 standard |
| electrical connection | straight connectors |
| nominal output power | 450 W for LXM32.U90M2 at 3 A, 230 V, single phase 350 W for LXM32.D18M2 at 6 A, 115 V, single phase |
| mounting support | international standard flange |
| maximum mechanical speed | 8000 rpm |
| holding brake | with |
| speed feedback resolution | 131072 points/turn |
| peak stall torque | 4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 4.2 N.m for LXM32.D18M2 at 6 A, 115 V, single phase |
| shaft end | smooth shaft |
| nominal speed | 4000 rpm for LXM32.U90M2 at 3 A, 230 V, single phase 2500 rpm for LXM32.D18M2 at 6 A, 115 V, single phase |
| nominal torque | 1.1 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 1.35 N.m for LXM32.D18M2 at 6 A, 115 V, single phase |
| continuous stall torque | 1.4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 1.4 N.m for LXM32.D18M2 at 6 A, 115 V, single phase |
| Komplementarno | |
| Teža izdelka | 2.6 kg |
| [Us] rated supply voltage | 240 V |
| length | 161 mm |
| network number of phases | three phase 3 |
| type of cooling | natural convection |
| range compatibility | Lexium 32 |
| shaft diameter | 11 mm |
| maximum current Irms | 9.6 A for LXM32.D18M2 9.6 A for LXM32.U90M2 |
| maximum permanent current | 9.56 A |
| circle diameter of the mounting holes | 82 mm |
| number of motor stacks | 1 |
| rotor inertia | 0.7 kg.cm² |
| centring collar depth | 2.5 mm |
| second shaft | without second shaft end |
| shaft length | 23 mm |
| centring collar diameter | 60 mm |
| motor flange size | 70 mm |
| number of mounting holes | 4 |
| holding torque | 3 N.m holding brake |
| mounting holes diameter | 5.5 mm |
| maximum radial force Fr | 660 N at 1000 rpm 520 N at 2000 rpm 460 N at 3000 rpm 410 N at 4000 rpm 380 N at 5000 rpm 360 N at 6000 rpm |
| sizing reference | BMH0701T |
| accuracy error [angular] | 1.4 ° |
| coefficient 2_1 | 8.75000000000026E-6 N.m/rpm |
| coefficient 1_3 | -2.965143E-22 N.m/rpm3 |
| coefficient 1_1 | -1.87500000003E-5 N.m/rpm |
| coefficient 1_2 | 5.62440546E-19 N.m/rpm² |
| maximum axial force Fa | 0.2 x Fr |
| continuous power | 1.05 W |
| temperature magnet hot | 100 °C |
| saturation coefficient 2 | -0.0078140960163432 |
| saturation coefficient 3 | 1.58151428E-19 |
| saturation coefficient 1 | -3.8243890773E-18 |
| stator electrical time constant | 2.8 ms at 20 °C |
| number of motor poles | 10 |
| back emf constant | 31.17 V/krpm at 120 °C |
| brake pull-in power | 7 W |
| stator inductance | 9.1 mH at 20 °C |
| feedback type | single turn SinCos Hiperface |
| stator resistance | 3.2 Ohm at 20 °C |
| continuous stall current | 2.85 A |
| motor voltage drop coefficient | 1 |
| temperature magnet rt | 20 °C |
| coefficient 1_5 | -7.8919E-30 N.m/rpm5 |
| coefficient 1_6 | 3.2E-34 N.m/rpm6 |
| coefficient 1_4 | 7.11E-26 N.m/rpm4 |
| torque constant | 0.49 N.m/A at 120 °C |
| temperature copper hot | 135 °C |
