Menu
Vaša košarica

XPSCM1144P Schneider Electric

XPSCM1144P  Schneider Electric
XPSCM1144P Schneider Electric

Opis

module XPS-CM - single-beam photo-electric sensors - 24 V DC

Tehnične lastnosti

Glavno
Serija izdelkaPreventa Safety detection
Izdelek ali sestavni delsafety module
[Us] Nazivna napajalna npetost24 V DC - 20...20 %
output typerelay 2 NO (13-14, 23-24), volt-free
Druge vhodne napetosti24 V DC for sensor 24 V DC (terminal(s) U+, U-) for muting function
connections - terminalscaptive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid or flexible without cable end captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with bezel captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1 mm² solid without cable end captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1.5 mm² flexible without cable end captive screw clamp terminals, removable terminal block, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel captive screw clamp terminals, removable terminal block, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
safety module nameXPSCM
safety module applicationfor monitoring of single beam photo-electric sensor
function of modulebuilt-in muting
number of additional circuits0
safety reliability dataMTTFd = 16.6 years conforming to EN/ISO 13849-1 DC = 95.5 % conforming to EN/ISO 13849-1 PFH = 3.12E-7 1/h conforming to EN/IEC 61508 PFHd = 3.12E-7 1/h conforming to EN/IEC 62061
safety levelcan reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1 can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061 can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
input compatibilityXC limit switch for muting function XU2M18PP340... for muting function XU2S18PP340... (infrared) for sensor XU9M18PP340... for muting function
number of inputs2 (terminal(s) MA, MB) for muting function 4 (terminal(s) Z1, Z2, Z3, Z4) for sensor
Komplementarno
[Ui] Nazivna izolacijska trdnost300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2 300 V (pollution degree 2) conforming to EN/IEC 60947-5-1
local signalling1 LED, function electronic internal fuse status 1 LED, function restarting 1 LED, function safety outputs closed 1 LED, function safety outputs open 1 incandescent lamp, function muting power consumption: 4-6.5 W
[Uimp] rated impulse withstand voltage4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2 4 kV overvoltage category III conforming to EN/IEC 60947-5-1
protection typeelectronic internal fuse
breaking capacity20 mA at 24 V for solid state output 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output 180 VA holding AC-15 C300 relay output 1800 VA inrush AC-15 C300 relay output
input current200 mA for muting function
maximum power consumption in W15 W
associated fuse rating4 A gG for relay output conforming to DIN VDE 0660 part 200 4 A gG for relay output conforming to EN/IEC 60947-5-1 6 A fast blow for relay output conforming to DIN VDE 0660 part 200 6 A fast blow for relay output conforming to EN/IEC 60947-5-1
maximum line resistance10 Ohm for sensor power supply
output thermal current5.6 A per relay 11 A maximum
minimum output voltage17 V for relay output
minimum output current10 mA for relay output
maximum response time on input open25 ms
synchronisation time between inputs3 s (+/- 20 %) for the activation of the MA/MB muting signal
sensor power supplyU+, U-: 24-24 V DC
maximum supply current for sensors200 mA
muting maximum duration60 s (- 10...30 %)
Okolje
Temperatura okoliškega zraka za delovanje-10-55 °C
IP stopnja zaščiteIP20 (terminals) conforming to IEC 60529 IP40 (enclosure) conforming to IEC 60529
Temperatura okoliškega zraka za skladiščenje-25-85 °C