BMXDDM3202K Schneider Electric
BMXDDM3202K Schneider Electric
Opis
discrete I/O module X80 - 16 inputs - 24 V DC - 16 outputs - solid state
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Modicon X80 |
| Izdelek ali sestavni del | discrete I/O module |
| discrete output type | solid state |
| discrete output voltage | 24 V 19...30 V DC |
| discrete output number | 16 |
| discrete output current | 0.1 A |
| discrete input number | 16 |
| discrete input voltage | 24 V DC, discrete input logic: positive |
| discrete input current | 2.5 mA |
| input compatibility | with 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2 |
| input type | current sink (logic positive) |
| Komplementarno | |
| Teža izdelka | 0.11 kg |
| Poraba toka | <= 104 mA at 24 V DC <= 166 mA at 3.3 V DC |
| protection type | 1 external fuse per group of input channel0.5 A fast blow overvoltage protection on output reverse polarity protection on input reverse polarity protection on output |
| voltage state 0 guaranteed | <= 5 V |
| voltage state 1 guaranteed | >= 11 V |
| switching frequency | 0.5/LI² Hz |
| status LED | 1 LED (green)module operating (RUN): 1 LED per channel (green)channel diagnostic: 1 LED (red)module error (ERR): 1 LED (red)module I/O: |
| insulation resistance | > 10 MOhm 500 V DC |
| response time on output | 1.2 ms |
| maximum leakage current | 0.1 mA at state 0 |
| typical current consumption | 69 mA at 24 V DC 150 mA at 3.3 V DC |
| maximum power dissipation in W | 4 W |
| maximum current per module | 3.2 A |
| output overvoltage protection | with transil diode |
| output short-circuit protection | with 2 A external fuse |
| output overload protection | with electronic circuit breaker 0.125 A < Id < 0.185 A with current limiter |
| current per channel | 0.125 A |
| voltage detection threshold | < 14 V DC preactuator fault < 14 V DC sensor fault > 18 V DC preactuator OK > 18 V DC sensor OK |
| maximum tungsten load | 1.2 W |
| [Ures] residual voltage | 1.5 V at state 1 |
| reverse polarity protection | reverse mounted diode |
| load impedance ohmic | <= 220 Ohm |
| paralleling of outputs | yes : 3 maximum |
| current state 1 guaranteed | >= 2 mA |
| current state 0 guaranteed | <= 1.5 mA |
| input impedance | 9600 Ohm |
| MTBF reliability | 432904 H |
| sensor power supply | 19-30 V |
| maximum overload time | 15 ms |
| DC typical filtering time | 4 ms |
| DC maximum filtering time | 7 ms |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | 0-60 °C |
| IP stopnja zaščite | IP20 |
| Temperatura okoliškega zraka za skladiščenje | -40-85 °C |
| relative humidity | 5-95 % at 55-55 °C without condensation |
| Nadmorska višina delovanja | 0...2000 m 2000...5000 m with derating factor |
| Certifikati izdelkov | CE Merchant Navy RCM EAC UL CSA |
| Standardi | EN 61131-2 EN 61000-6-4 EN 61000-6-2 EN 61010-2-201 |
| Odporno proti udarcu | 30 gn |
| Odpornost proti vibracijam | 3 gn |
| Zaščitna obdelava | TC |
| directives | 2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2012/19/EU - WEEE directive |
| dielectric strength | 1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic 1500 V AC at 50/60 Hz 1 minute, primary/secondary 500 V DC 1 minute, between group of inputs and outputs |
