Menu
Vaša košarica

ATS48C66Q Schneider

ATS48C66Q  Schneider
ATS48C66Q Schneider

Opis

soft starter for asynchronous motor - ATS48 - 605 A - 230..415 V - 160..500 KW

Tehnične lastnosti

Glavno
Serija izdelkaAltistart 48
Izdelek ali sestavni delsoft starter
utilisation categoryAC-53A
Kratko ime napraveATS48
[Us] Nazivna napajalna npetost230...415 V - 15...10 %
product destinationasynchronous motors
IP degree of protectionIP00
product specific applicationheavy duty industry and pumps
motor power kW160 kW at 230 V connection in the motor supply line for severe applications 315 kW at 230 V connection to the motor delta terminals for standard applications 315 kW at 400 V connection in the motor supply line for severe applications 355 kW at 400 V connection in the motor supply line for standard applications 400 kW at 400 V connection to the motor delta terminals for severe applications 500 kW at 400 V connection to the motor delta terminals for standard applications
power dissipation in W1731 W for standard applications 1958 W for severe applications
IcL starter rating660 A for connection in the motor supply line for severe applications 660 A for connection in the motor supply line for standard applications 1143 A for connection to the motor delta terminals for standard applications 1143 A for connection to the motor delta terminals for severe applications
type of startstart with torque control (current limited to 5 In)
Komplementarno
network frequency47.5...63 Hz
Višina670 mm
Teža izdelka51.4 kg
Širina400 mm
Globina300 mm
Omejitve napajalne napetosti195-456 V
protection typephase failure: line thermal protection: motor thermal protection: starter
operating positionvertical +/- 10 degree
[Uc] control circuit voltage220 - 15 % to 415 + 10 %, 50/60 Hz
OznačevanjeCE
transmission rate4800, 9600 or 19200 bps
type of coolingforced convection
function availableexternal bypass (optional)
supply frequency50...60 Hz - 5...5 %
maximum switching currentlogic output 0.2 A at 30 V DC relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms
discrete output type (LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO
discrete input logicpositive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
analogue output typecurrent output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
physical interfaceRS485 multidrop
connector type1 RJ45
discrete output number2
communication port protocolModbus
minimum switching current10 mA at 6 V DC for relay outputs
discrete input number5
discrete input typePTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
power range110-220 kW at 200-240 V 3 phases 250-500 kW at 380-440 V 3 phases 250-500 kW at 200-240 V 3 phases
motor starter typesoft starter
assembly stylewith heat sink
discrete input voltage24 V <= 30 V
installed device31
device connectionto the motor delta terminals in the motor supply line
communication data linkserial
control circuit consumption80 W
supply inrush current0.4...1.3 Icl adjustable
factory setting current605 A
output absolute accuracy precision+/- 5 %
Okolje
Temperatura okoliškega zraka za delovanje40-60 °C (with current derating of 2 % per °C) -10-40 °C (without)
Stopnja onesnaženostilevel 3 conforming to IEC 60664-1
Temperatura okoliškega zraka za skladiščenje-25-70 °C
relative humidity0-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Nadmorska višina delovanja<= 1000 m without > 1000...2000 m with current derating of 2.2 % per additional 100 m
Certifikati izdelkovDNV SEPRO TCF CCC UL CSA NOM 117 C-Tick GOST
StandardiEN/IEC 60947-4-2
Odporno proti udarcu15 gn for 11 ms conforming to EN/IEC 60068-2-27
Odpornost proti vibracijam1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2-13 Hz) conforming to EN/IEC 60068-2-6
Elektromagnetna kompatibilnostconducted and radiated emissions level A conforming to IEC 60947-4-2 damped oscillating waves level 3 conforming to IEC 61000-4-12 electrostatic discharge level 3 conforming to IEC 61000-4-2 immunity to electrical transients level 4 conforming to IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 voltage/current impulse level 3 conforming to IEC 61000-4-5
noise level55 dB