ATV312HU15M2 Schneider
ATV312HU15M2 Schneider
Opis
variable speed drive ATV312 - 1.5kW - 3.2kVA - 90W - 200..240 V- 1-phase supply
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Altivar 312 |
| Izdelek ali sestavni del | variable speed drive |
| [Us] Nazivna napajalna npetost | 200...240 V - 15...10 % |
| product destination | asynchronous motors |
| supply | internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection |
| IP degree of protection | IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part |
| electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5-5 mm² AWG 10 |
| product specific application | simple machine |
| network number of phases | single phase |
| component name | ATV312 |
| line current | 15.8 A at 200 V, Isc = 1 kA 13.3 A at 240 V |
| asynchronous motor control profile | sensorless flux vector control with PWM type motor control signal factory set : constant torque |
| apparent power | 3.2 kVA |
| motor power kW | 1.5 kW |
| maximum transient current | 12 A for 60 s |
| assembly style | with heat sink |
| EMC filter | integrated |
| motor power hp | 2 hp |
| communication port protocol | CANopen Modbus |
| option card | communication card for CANopen daisy chain communication card for DeviceNet communication card for Fipio communication card for Modbus TCP communication card for Profibus DP |
| supply frequency | 50...60 Hz - 5...5 % |
| power dissipation in W | 90 W at nominal load |
| speed range | 1-50 |
| Komplementarno | |
| network frequency | 47.5...63 Hz |
| Višina | 143 mm |
| Teža izdelka | 1.8 kg |
| local signalling | 1 LED (red)drive voltage: four 7-segment display unitsCANopen bus status: |
| Širina | 107 mm |
| Globina | 152 mm |
| tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6-0.6 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 1.2-1.2 N.m |
| Omejitve napajalne napetosti | 170-264 V |
| protection type | input phase breaks: drive line supply overvoltage and undervoltage safety circuits: drive line supply phase loss safety function, for three phases supply: drive motor phase breaks: drive overcurrent between output phases and earth (on power up only): drive overheating protection: drive short-circuit between motor phases: drive thermal protection: motor |
| operating position | vertical +/- 10 degree |
| output voltage | <= power supply voltage |
| Označevanje | CE |
| transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen 4800, 9600 or 19200 bps for Modbus |
| switching frequency | 2...16 kHz adjustable |
| insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
| insulation | electrical between power and control |
| maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms |
| discrete output type | configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles configurable relay logic: (R2A, R2B) NC - 100000 cycles |
| response time | AOV, AOC 8 ms for analog R1A, R1B, R1C, R2A, R2B 8 ms for discrete |
| discrete input logic | logic input not wired (LI1...LI4), < 13 V (state 1) negative logic (source) (LI1...LI6), > 19 V (state 0) positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) |
| acceleration and deceleration ramps | S, U or customized linear adjustable separately from 0.1 to 999.9 s |
| analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits |
| physical interface | RS485 multidrop serial link |
| transient overtorque | 170-200 % of nominal motor torque |
| frequency resolution | analog input: 0.1...100 Hz display unit: 0.1 Hz |
| connector type | 1 RJ45 for Modbus/CANopen |
| analogue input number | 3 |
| motor slip compensation | automatic whatever the load adjustable suppressable |
| discrete output number | 2 |
| regulation loop | frequency PI regulator |
| transmission frame | RTU |
| analogue output number | 1 |
| minimum switching current | R1-R2 10 mA at 5 V DC |
| discrete input number | 6 |
| linearity error | +/- 0.2 % for output |
| number of addresses | 1-127 for CANopen 1-247 for Modbus |
| braking to standstill | by DC injection |
| discrete input type | (LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm |
| analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm AI3 configurable current 0...20 mA, impedance: 250 Ohm |
| braking torque | 150 % during 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
| sampling duration | AI1, AI2, AI3: 8 ms analog LI1...LI6: 4 ms discrete |
| prospective line Isc | 1 kA |
| continuous output current | 8 A at 4 kHz |
| nominal switching frequency | 4 kHz |
| time constant | 5 ms for reference change |
| output frequency | 0-500 kHz |
| number of drive | 127 for CANopen 31 for Modbus |
| outer dimension | 184 x 149 x 145 mm 200 x 180 x 144 mm 143 x 105 x 150 mm |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -10-50 °C without (with protective cover on top of the drive) -10-60 °C with derating factor (without protective cover on top of the drive) |
| Stopnja onesnaženosti | 2 |
| Temperatura okoliškega zraka za skladiščenje | -25-70 °C |
| relative humidity | 5-95 % without condensation conforming to IEC 60068-2-3 5-95 % without dripping water conforming to IEC 60068-2-3 |
| Nadmorska višina delovanja | <= 1000 m without 1000...2000 m with current derating 1 % per 100 m |
| Certifikati izdelkov | UL DNV C-Tick CSA NOM GOST |
| Standardi | IEC 61800-3 IEC 61800-5-1 |
| Odporno proti udarcu | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Odpornost proti vibracijam | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| Zaščitna obdelava | TC |
| Elektromagnetna kompatibilnost | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 |
| dielectric strength | 2040 V DC between earth and power terminals 2880 V AC between control and power terminals |
