ATV320U04M2B Schneider Electric
ATV320U04M2B Schneider Electric
Opis
variable speed drive, ATV320, 0.37 kW, 200…240 V, 1 phase, book
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Altivar Machine ATV320 |
| Izdelek ali sestavni del | variable speed drive |
| Kratko ime naprave | ATV320 |
| [Us] Nazivna napajalna npetost | 200...240 V - 15...10 % |
| product destination | synchronous motors asynchronous motors |
| IP degree of protection | IP20 conforming to EN/IEC 61800-5-1 IP20 conforming to IEC 60529 |
| product specific application | complex machines |
| network number of phases | 1 phase |
| line current | 6.0 A at 200 V (heavy duty) 5.0 A at 240 V (heavy duty) |
| asynchronous motor control profile | voltage/frequency ratio, 5 points flux vector control without sensor, standard voltage/frequency ratio - Energy Saving, quadratic U/f flux vector control without sensor - Energy Saving voltage/frequency ratio, 2 points |
| apparent power | 1.2 kVA at 240 V (heavy duty) |
| motor power kW | 0.37 kW for heavy duty |
| switching frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| maximum transient current | 5.0 A during 60 s (heavy duty) |
| nominal switching frequency | 4 kHz |
| EMC filter | Class C2 EMC filter integrated |
| motor power hp | 0.5 hp for heavy duty |
| prospective line Isc | 1 kA |
| speed drive output frequency | 0.1-599 Hz |
| communication port protocol | Modbus serial CANopen |
| type of cooling | fan |
| continuous output current | 3.3 A at 4 kHz for heavy duty |
| safety function | STO (safe torque off) SIL 3 SLS (safe limited speed) SS1 (safe stop 1) SMS (safe maximum speed) GDL (guard door locking) |
| option card | communication module, CANopen daisy chain RJ45 communication module, CANopen SUB-D 9 communication module, CANopen open style terminal block communication module, EtherCAT RJ45 communication module, DeviceNet communication module, Ethernet/IP communication module, Profibus DP V1 communication module, Profinet communication module, Ethernet Powerlink |
| supply frequency | 50...60 Hz - 5...5 % |
| synchronous motor control profile | vector control without sensor |
| format of the drive | book |
| power range | 0.37...0.55 kW at 200-240 V, 1 phase (based on load duty) |
| Komplementarno | |
| Višina | 325.0 mm |
| Teža izdelka | 2.4 kg |
| local signalling | 1 LED (green)CANopen run: 1 LED (red)CANopen error: 1 LED (red)drive fault: 1 LED (red)drive voltage: |
| Širina | 45 mm |
| Globina | 245 mm |
| protection type | input phase breaks: drive overcurrent between output phases and earth: drive overheating protection: drive short-circuit between motor phases: drive thermal protection: drive |
| output voltage | <= power supply voltage |
| electrical connection | spring cage terminal, clamping capacity: 1.5...4 mm², AWG 14...AWG 10 (power supply) spring cage terminal, clamping capacity: 1.5 mm², AWG 14 (DC bus) spring cage terminal, clamping capacity: 1.5 mm², AWG 14 (motor/braking resistor) spring cage terminal, clamping capacity: 0.5...1.5 mm², AWG 20...AWG 16 (control) |
| transmission rate | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen |
| specific application | machinery |
| accuracy | +/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60 °C analog input +/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C analog input +/- 1 % AQ1 for a temperature of 25 °C analog output +/- 2 % AQ1 for a temperature of -10...60 °C analog output |
| maximum switching current | relay output R1 on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1 on resistive load, cos phi = 1 : 4 A at 30 V DC relay output R1, R2 on inductive load, cos phi = 0.4 : 2 A at 250 V AC relay output R1, R2 on inductive load, cos phi = 0.4 : 2 A at 30 V DC relay output R2 on resistive load, cos phi = 1 : 5 A at 250 V AC relay output R2 on resistive load, cos phi = 1 : 5 A at 30 V DC |
| discrete output type | configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles configurable relay logic: (R2A, R2B) NO - 100000 cycles logic: (LO) |
| discrete input logic | negative logic (sink) (DI1...DI6), > 19 V (state 0), < 13 V (state 1) positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) |
| acceleration and deceleration ramps | linear U S CUS ramp switching acceleration/deceleration ramp adaptation acceleration/deceleration automatic stop with DC injection |
| analogue output type | AQ1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 10 bits AQ1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 10 bits |
| physical interface | 2-wire RS 485 for Modbus serial/CANopen |
| transient overtorque | 170-200 % of nominal motor torque |
| torque accuracy | +/- 15 % |
| data format | 8 bits, configurable odd, even or no parity for Modbus serial |
| frequency resolution | display unit: 0.1 Hz analog input: 0.012/50 Hz |
| connector type | 1 RJ45 (on front face) for Modbus/CANopen |
| analogue input number | 3 |
| motor slip compensation | automatic whatever the load adjustable 0...300 % not available in voltage/frequency ratio (2 or 5 points) |
| discrete output number | 3 |
| regulation loop | adjustable PID regulator |
| transmission frame | RTU for Modbus serial |
| analogue output number | 1 |
| minimum switching current | relay output R1, R2: 5 mA at 24 V DC |
| method of access | slave CANopen |
| speed range | 1-100 for asynchronous motor in open-loop mode |
| discrete input number | 7 |
| linearity error | AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog input AQ1: +/- 0.3 % for analog output |
| number of addresses | 1-127 for CANopen 1-247 for Modbus serial |
| braking to standstill | by DC injection |
| discrete input type | programmable (sink/source) (DI1...DI4)24...30 V DC, with level 1 PLC programmable as pulse input 20 kpps (DI5)24...30 V DC, with level 1 PLC switch-configurable PTC probe (DI6)24...30 V DC safe torque off (STO)24...30 V DC - 1500 Ohm |
| analogue input type | AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| supply | internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| braking torque | <= 170 % during 60 s with braking resistor |
| speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| sampling duration | 2 ms (AI1, AI2, AI3) - analog input 2 ms (AQ1) - analog output |
| refresh time | logic input (DI1...DI6): 8 ms (+/- 0.7 ms) relay output (R1A, R1B, R1C): 2 ms relay output (R2A, R2C): 2 ms |
| type of polarization | no impedance for Modbus serial |
| power range | 0.37-0.55 kW at 200-240 V 1 phase |
| motor starter type | variable speed drive |
| permissible temporary current boost | 1.5 x In during 60 s (heavy duty) |
| variant | standard version |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -10-50 °C without 50-60 °C with derating factor |
| Stopnja onesnaženosti | 2 conforming to EN/IEC 61800-5-1 |
| Temperatura okoliškega zraka za skladiščenje | -25-70 °C |
| relative humidity | 5-95 % without condensation conforming to IEC 60068-2-3 5-95 % without dripping water conforming to IEC 60068-2-3 |
| Nadmorska višina delovanja | <= 1000 m without 1000...2000 m with current derating 1 % per 100 m |
| Certifikati izdelkov | CE ATEX NOM GOST EAC RCM KC REACH |
| Standardi | EN/IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 60721-3 IEC 61508 IEC 13849-1 UL 508C UL 61800-5-1 CSA C22.2 No 274 |
| Odporno proti udarcu | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Odpornost proti vibracijam | 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 2-13 Hz) conforming to EN/IEC 60068-2-6 |
| Elektromagnetna kompatibilnost | electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| environmental characteristic | chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3 |
| operating position | vertical +/- 10 degree |
| marking | CE ATEX UL CSA EAC RCM |
| noise level | 43 dB conforming to 86/188/EEC |
| insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| power dissipation in W | fan: 31.0 W at 200 V, switching frequency 4 kHz |
| volume of cooling air | 9.4 m3/h |
| isolation | between power and control terminals |
