ATV950D11N4E Schneider Electric
ATV950D11N4E Schneider Electric
Opis
variable speed drive, ATV950, 11kW, 400/480V, w braking unit/switch, IP55
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Altivar Process ATV900 |
| Izdelek ali sestavni del | variable speed drive |
| Aplikacija naprave | industrial application |
| Kratko ime naprave | ATV950 |
| [Us] Nazivna napajalna npetost | 380...480 V - 15...10 % |
| product destination | synchronous motors asynchronous motors |
| variant | with braking chopper with load break switch |
| IP degree of protection | IP55 conforming to IEC 61800-5-1 IP55 conforming to IEC 60529 |
| network number of phases | 3 phases |
| line current | 19.8 A at 380 V (normal duty) 17 A at 480 V (normal duty) 14.1 A at 380 V (heavy duty) 12.5 A at 480 V (heavy duty) |
| asynchronous motor control profile | variable torque standard constant torque standard optimized torque mode |
| apparent power | 14.1 kVA at 480 V (normal duty) 10.4 kVA at 480 V (heavy duty) |
| motor power kW | 11 kW (normal duty) 7.5 kW (heavy duty) |
| switching frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| maximum transient current | 28.2 A during 60 s (normal duty) 24.8 A during 60 s (heavy duty) |
| nominal switching frequency | 4 kHz |
| EMC filter | integrated with 50 m conforming to EN/IEC 61800-3 category C2 integrated with 150 m conforming to EN/IEC 61800-3 category C3 |
| motor power hp | 15 hp normal duty 10 hp heavy duty |
| prospective line Isc | 50 kA |
| speed drive output frequency | 0.1-599 Hz |
| communication port protocol | Modbus serial Ethernet/IP Modbus TCP |
| discrete input logic | 16 preset speeds |
| type of cooling | forced convection |
| continuous output current | 23.5 A at 4 kHz for normal duty 16.5 A at 4 kHz for heavy duty |
| safety function | STO (safe torque off) SIL 3 |
| option card | slot A: communication module for Profibus DP V1 slot A: communication module for Profinet slot A: communication module for DeviceNet slot A: communication module for EtherCAT slot A: communication module for CANopen daisy chain RJ45 slot A: communication module for CANopen SUB-D 9 slot A: communication module for CANopen screw terminals slot A/slot B/slot C: digital and analog I/O extension module slot A/slot B/slot C: output relay extension module slot B: 5/12 V digital encoder interface module slot B: analog encoder interface module slot B: resolver encoder interface module communication module for Ethernet Powerlink |
| supply frequency | 50...60 Hz +/- 5 % |
| synchronous motor control profile | permanent magnet motor synchronous reluctance motor |
| Komplementarno | |
| Višina | 678 mm |
| Teža izdelka | 13.7 kg |
| mounting mode | wall mount |
| local signalling | local diagnostic: 3 LED (mono/dual colour) embedded communication status: 5 LED (dual colour) communication module status: 2 LED (dual colour) presence of voltage: 1 LED (red) |
| Širina | 264 mm |
| Globina | 330 mm |
| protection type | thermal protection: motor safe torque off: motor motor phase break: motor thermal protection: drive safe torque off: drive overheating: drive overcurrent between output phases and earth: drive overload of output voltage: drive short-circuit protection: drive motor phase break: drive overvoltages on the DC bus: drive line supply overvoltage: drive line supply undervoltage: drive line supply phase loss: drive overspeed: drive break on the control circuit: drive |
| output voltage | <= power supply voltage |
| electrical connection | control: screw terminal0.5...1.5 mm² line side: screw terminal6 mm² motor: screw terminal6...10 mm² DC bus: screw terminal6...10 mm² |
| transmission rate | 10/100 Mbit/s for Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| maximum switching current | relay output R1 on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1 on resistive load, cos phi = 1 : 3 A at 30 V DC relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 250 V AC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 30 V DC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| discrete output type | logic output DQ+ 0-1 kHz <= 30 V DC 100 mA programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA logic output DQ- 0-1 kHz <= 30 V DC 100 mA |
| discrete input logic | positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) |
| acceleration and deceleration ramps | linear adjustable separately from 0.01...9999 s |
| analogue output type | software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits |
| physical interface | 2-wire RS 485 for Modbus serial |
| data format | 8 bits, configurable odd, even or no parity for Modbus serial |
| frequency resolution | display unit: 0.1 Hz analog input: 0.012/50 Hz |
| connector type | 2 RJ45 for Ethernet IP/Modbus TCP on the control block 1 RJ45 for Modbus serial on the control block |
| analogue input number | 3 |
| motor slip compensation | adjustable automatic whatever the load not available in permanent magnet motor law can be suppressed |
| discrete output number | 2 |
| transmission frame | RTU for Modbus serial |
| analogue output number | 2 |
| minimum switching current | relay output R1, R2, R3: 5 mA at 24 V DC |
| method of access | slave Modbus TCP |
| discrete input number | 10 |
| linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output |
| number of addresses | 1-247 for Modbus serial |
| braking to standstill | by DC injection |
| discrete input type | DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI7, DI8 programmable as pulse input: 0-30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
| analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits |
| supply | external supply for digital inputs: 24 V DC (19-30 V), <1.25 mA, protection type: overload and short-circuit protection internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection internal supply for digital inputs and STO: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection |
| sampling duration | 2 ms +/- 0.5 ms (DI1...DI8) - discrete input 5 ms +/- 1 ms (DI7, DI8) - pulse input 1 ms +/- 1 ms (AI1, AI2, AI3) - analog input 5 ms +/- 1 ms (AQ1, AQ2) - analog output |
| exchange mode | half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| relay output number | 3 |
| IP degree of protection | IP55 |
| relay output type | configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles |
| input compatibility | DI1...DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| refresh time | relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| isolation | between power and control terminals |
| type of polarization | no impedance for Modbus serial |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -15-40 °C (without) 40-50 °C (with derating factor) |
| Stopnja onesnaženosti | 2 conforming to EN/IEC 61800-5-1 |
| Temperatura okoliškega zraka za skladiščenje | -40-70 °C |
| relative humidity | 5-95 % without condensation conforming to IEC 60068-2-3 |
| Nadmorska višina delovanja | <= 1000 m without 1000...4800 m with current derating 1 % per 100 m |
| Certifikati izdelkov | TÜV REACH |
| Standardi | EN/IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
| Odporno proti udarcu | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Odpornost proti vibracijam | 1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6 |
| Elektromagnetna kompatibilnost | electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| environmental characteristic | chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 |
| operating position | vertical +/- 10 degree |
| marking | CE |
| noise level | 52 dB conforming to 86/188/EEC |
| insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| maximum THDI | <48 % from 80...100 % of load conforming to IEC 61000-3-12 |
