XPSTSA5142P Schneider Electric
XPSTSA5142P Schneider Electric
Opis
module XPSTS - interlocking on high inertia machines - 24 V AC DC
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Preventa Safety automation |
| Izdelek ali sestavni del | Preventa safety time delay module |
| [Us] Nazivna napajalna npetost | 24 V AC - 20...10 % 24 V DC - 15...15 % |
| output type | relay, 1 NO + 2 NC circuit(s), volt-free |
| safety module name | XPSTSA |
| safety module application | for application with interlocking on high inertia |
| function of module | monitoring safety time delays |
| number of additional circuits | 2 solid state outputs |
| safety reliability data | MTTFd = 126 years conforming to EN/ISO 13849-1 DC = 60...90 % conforming to EN/ISO 13849-1 PFHd = 1.3E-7 1/h conforming to EN/IEC 62061 |
| safety level | can reach PL d/category 3 conforming to EN/ISO 13849-1 can reach SILCL 2 conforming to EN/IEC 62061 |
| Komplementarno | |
| Višina | 99 mm |
| mounting support | 35 mm symmetrical DIN rail |
| Teža izdelka | 0.25 kg |
| Povezave - terminali | captive screw clamp terminals flexible cable: 0.14...0.75 mm² without cable end, 1 wire captive screw clamp terminals flexible cable: 0.14...2.5 mm² without cable end, 1 wire captive screw clamp terminals flexible cable: 0.25...1 mm² with cable end, without bezel, 1 wire captive screw clamp terminals flexible cable: 0.25...1.5 mm² with cable end, with bezel, 1 wire captive screw clamp terminals flexible cable: 0.25...2.5 mm² with cable end, without bezel, 1 wire captive screw clamp terminals flexible cable: 0.5...1.5 mm² with cable end, with double bezel, 1 wire captive screw clamp terminals solid cable: 0.14...0.75 mm² without cable end, 1 wire captive screw clamp terminals solid cable: 0.14...2.5 mm² without cable end, 1 wire |
| [Ui] Nazivna izolacijska trdnost | 300 V (pollution degree 2) conforming to IEC 60947-5-1 300 V (pollution degree 2) conforming to DIN VDE 0110 part 1 |
| local signalling | 4 LEDs |
| [Uimp] rated impulse withstand voltage | 4 kV overvoltage category III conforming to IEC 60947-5-1 4 kV overvoltage category III conforming to DIN VDE 0110 part 1 |
| Širina | 45 mm |
| Globina | 114 mm |
| [Ith] conventional free air thermal current | 6 A for relay output |
| breaking capacity | 10 mA at 48 V 20 mA at 24 V for solid state output circuit 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output 180 VA holding AC-15 C300 relay output 1800 VA inrush AC-15 C300 relay output |
| supply frequency | 50/60 Hz |
| associated fuse rating | 4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 |
| input protection type | internal, electronic |
| maximum power consumption in VA | 2.3 VA DC 4.3 VA AC |
| minimum output voltage | 17 V for relay output |
| minimum output current | 10 mA for relay output |
| time delay | 1...31 s configurable |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | -10-55 °C |
| IP stopnja zaščite | IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529 |
| Temperatura okoliškega zraka za skladiščenje | -25-85 °C |
| Certifikati izdelkov | TÜV UL CSA |
| Standardi | EN/IEC 60204-1 EN/IEC 60947-5-1 |
