BMH1001P37F2A Schneider Electric
BMH1001P37F2A Schneider Electric
Opis
servo motor BMH - 3.3 Nm - 6000 rpm - keyed shaft - with brake - IP65/IP67
Tehnične lastnosti
| Glavno | |
| Izdelek ali sestavni del | servo motor |
| Kratko ime naprave | BMH |
| Združljivost izdelkov | LXM32.D12N4 at 400...480 V three phase LXM32.D18N4 at 400...480 V three phase |
| IP degree of protection | IP65 standard IP67 with IP67 kit |
| electrical connection | rotatable right-angled connectors |
| nominal output power | 800 W for LXM32.D12N4 at 3 A, 400 V, three phase 800 W for LXM32.D12N4 at 3 A, 480 V, three phase 1300 W for LXM32.D18N4 at 6 A, 400 V, three phase 1300 W for LXM32.D18N4 at 6 A, 480 V, three phase |
| mounting support | international standard flange |
| maximum mechanical speed | 6000 rpm |
| holding brake | with |
| speed feedback resolution | 32768 points/turn x 4096 turns |
| peak stall torque | 10.8 N.m for LXM32.D12N4 at 3 A, 400 V, three phase 10.8 N.m for LXM32.D12N4 at 3 A, 480 V, three phase 10.8 N.m for LXM32.D18N4 at 6 A, 400 V, three phase 10.8 N.m for LXM32.D18N4 at 6 A, 480 V, three phase |
| shaft end | keyed |
| nominal speed | 4000 rpm for LXM32.D12N4 at 3 A, 400 V, three phase 4000 rpm for LXM32.D12N4 at 3 A, 480 V, three phase 4000 rpm for LXM32.D18N4 at 6 A, 400 V, three phase 4000 rpm for LXM32.D18N4 at 6 A, 480 V, three phase |
| nominal torque | 1.9 N.m for LXM32.D12N4 at 3 A, 400 V, three phase 1.9 N.m for LXM32.D12N4 at 3 A, 480 V, three phase 3.1 N.m for LXM32.D18N4 at 6 A, 400 V, three phase 3.1 N.m for LXM32.D18N4 at 6 A, 480 V, three phase |
| continuous stall torque | 3.3 N.m for LXM32.D12N4 at 3 A, 400 V, three phase 3.3 N.m for LXM32.D12N4 at 3 A, 480 V, three phase 3.4 N.m for LXM32.D18N4 at 6 A, 400 V, three phase 3.4 N.m for LXM32.D18N4 at 6 A, 480 V, three phase |
| Komplementarno | |
| Teža izdelka | 4.8 kg |
| [Us] rated supply voltage | 480 V |
| length | 170.3 mm |
| network number of phases | three phase 3 |
| type of cooling | natural convection |
| range compatibility | Lexium 32 |
| shaft diameter | 19 mm |
| maximum current Irms | 11.9 A for LXM32.D12N4 11.9 A for LXM32.D18N4 |
| maximum permanent current | 11.93 A |
| circle diameter of the mounting holes | 115 mm |
| number of motor stacks | 1 |
| rotor inertia | 3.68 kg.cm² |
| centring collar depth | 3.5 mm |
| second shaft | without second shaft end |
| shaft length | 40 mm |
| centring collar diameter | 95 mm |
| motor flange size | 100 mm |
| number of mounting holes | 4 |
| holding torque | 5.5 N.m holding brake |
| mounting holes diameter | 9 mm |
| maximum radial force Fr | 900 N at 1000 rpm 720 N at 2000 rpm 630 N at 3000 rpm 570 N at 4000 rpm 530 N at 5000 rpm |
| sizing reference | BMH1001P |
| accuracy error [angular] | 4.8 ° |
| coefficient 2_1 | 2.99377323297476E-5 N.m/rpm |
| coefficient 1_3 | 1.14662505221828E-10 N.m/rpm3 |
| coefficient 1_1 | -1.58982698204E-5 N.m/rpm |
| coefficient 1_2 | -1.31523855696478E-7 N.m/rpm² |
| maximum axial force Fa | 0.2 x Fr |
| continuous power | 1.76 W |
| temperature magnet hot | 100 °C |
| saturation coefficient 2 | -0.0104187946884576 |
| saturation coefficient 3 | 4.600768814E-19 |
| saturation coefficient 1 | -1.02079558078E-17 |
| stator electrical time constant | 4.5 ms at 20 °C |
| number of motor poles | 10 |
| back emf constant | 70.3 V/krpm at 120 °C |
| brake pull-in power | 12 W |
| stator inductance | 13.9 mH at 20 °C |
| feedback type | multiturn SinCos Hiperface |
| stator resistance | 3.1 Ohm at 20 °C |
| continuous stall current | 3.15 A |
| motor voltage drop coefficient | 1 |
| temperature magnet rt | 20 °C |
| coefficient 1_5 | 6.44449878303239E-18 N.m/rpm5 |
| coefficient 1_6 | -3.5802771017697E-22 N.m/rpm6 |
| coefficient 1_4 | -4.17777026831263E-14 N.m/rpm4 |
| torque constant | 1.1 N.m/A at 120 °C |
| temperature copper hot | 135 °C |
| key width | 30 mm |
