ATV340D37N4E Schneider Electric
ATV340D37N4E Schneider Electric
Opis
variable speed drive - 37kW- 400V - 3 phases - ATV340 Ethernet
Tehnične lastnosti
| Glavno | |
| Serija izdelka | Altivar Machine ATV340 |
| Izdelek ali sestavni del | variable speed drive |
| Aplikacija naprave | machine |
| Kratko ime naprave | ATV340 |
| [Us] Nazivna napajalna npetost | 380...480 V - 15...10 % |
| product destination | synchronous motors asynchronous motors |
| variant | standard version |
| IP degree of protection | IP20 conforming to IEC 61800-5-1 IP20 conforming to IEC 60529 |
| mounting mode | wall mount |
| network number of phases | 3 phases |
| line current | 79.8 A at 380 V with internal line choke (normal duty) 69.1 A at 480 V with internal line choke (normal duty) 67.1 A at 380 V with internal line choke (heavy duty) 59 A at 480 V with internal line choke (heavy duty) 67.1 A 59.0 A |
| asynchronous motor control profile | optimized torque mode variable torque standard constant torque standard |
| apparent power | 57.4 kVA at 480 V (normal duty) 49.1 kVA at 480 V (heavy duty) |
| motor power kW | 45 kW for normal duty 37 kW for heavy duty |
| switching frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| maximum transient current | 105.6 A during 60 s (normal duty) 105.6 A during 2 s (normal duty) 111.8 A during 60 s (heavy duty) 111.8 A during 2 s (heavy duty) |
| nominal switching frequency | 4 kHz |
| EMC filter | integrated with 50 m conforming to EN/IEC 61800-3 category C2 integrated with 150 m conforming to EN/IEC 61800-3 category C3 |
| motor power hp | 60 hp for normal duty 50 hp for heavy duty |
| prospective line Isc | 50 kA |
| speed drive output frequency | 0.1-500 Hz |
| type of cooling | forced convection |
| continuous output current | 88 A at 4 kHz for normal duty 74.5 A at 4 kHz for heavy duty |
| safety function | STO (safe torque off) SIL 3 |
| supply frequency | 50...60 Hz +/- 5 % |
| synchronous motor control profile | reluctance motor permanent magnet motor |
| degree of protection | UL type 1 conforming to UL 508C |
| Komplementarno | |
| Višina | 660 mm |
| Teža izdelka | 28.4 kg |
| local signalling | local diagnostic: 3 LED (mono/dual colour) embedded communication status: 5 LED (dual colour) communication module status: 2 LED (dual colour) presence of voltage: 1 LED (red) |
| Širina | 213 mm |
| Globina | 262 mm |
| protection type | thermal protection: motor safe torque off: motor motor phase loss: motor thermal protection: drive safe torque off: drive overheating: drive overcurrent: drive output overcurrent between motor phase and earth: drive output overcurrent between motor phases: drive short-circuit between motor phase and earth: drive short-circuit between motor phases: drive motor phase loss: drive DC Bus overvoltage: drive line supply overvoltage: drive line supply undervoltage: drive input supply loss: drive exceeding limit speed: drive break on the control circuit: drive |
| output voltage | <= power supply voltage |
| electrical connection | control: screw terminal0.75...1.5 mm²/AWG 18...AWG 16 line side: screw terminal35...50 mm²/AWG 2...AWG 1 DC bus: screw terminal35...50 mm²/AWG 3...AWG 1 motor: screw terminal50 mm²/AWG 1 |
| transmission rate | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus serial 10/100 Mbit/s for Ethernet IP/Modbus TCP |
| accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| maximum switching current | relay output R1 on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1 on resistive load, cos phi = 1 : 3 A at 30 V DC relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 250 V AC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 30 V DC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| discrete input logic | positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) 16 preset speeds |
| acceleration and deceleration ramps | linear adjustable separately from 0.01...9999 s S, U or customized |
| analogue output type | software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits |
| physical interface | 2-wire RS 485 for Modbus serial |
| data format | 8 bits, configurable odd, even or no parity for Modbus serial |
| frequency resolution | display unit: 0.1 Hz analog input: 0.012/50 Hz |
| connector type | connector(s)1 x RJ45, Modbus serial on front face connector(s)1 x RJ45, Modbus serial for HMI on front face connector(s)2 x RJ45, Ethernet IP/Modbus TCP on front face |
| analogue input number | 3 |
| motor slip compensation | adjustable can be suppressed automatic whatever the load not available in permanent magnet motor law |
| discrete output number | 2 |
| communication port protocol | Modbus TCP Modbus serial Ethernet/IP |
| transmission frame | RTU for Modbus serial |
| analogue output number | 2 |
| minimum switching current | relay output R1, R2, R3: 5 mA at 24 V DC |
| method of access | slave Modbus RTU slave Modbus TCP |
| discrete input number | 10 |
| linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output |
| number of addresses | 1-247 for Modbus serial |
| braking to standstill | by DC injection |
| discrete input type | STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm DI7, DI8 programmable as pulse input: 0-30 kHz, 24 V DC (<= 30 V) DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 4.4 kOhm |
| analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI1, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI1, AI3 software-configurable temperature probe or water level sensor |
| supply | external supply for digital inputs: 24 V DC (19-30 V), <1.25 mA, protection type: overload and short-circuit protection internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection internal supply for digital inputs and STO: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection |
| sampling duration | 2 ms +/- 0.5 ms (DI1...DI8) - discrete input 5 ms +/- 1 ms (DI7, DI8) - pulse input 1 ms +/- 1 ms (AI1, AI2, AI3) - analog input 5 ms +/- 1 ms (AQ1, AQ2) - analog output |
| option card | slot GP-X: digital and analog I/O extension module slot GP-X: output relay extension module slot GP-ENC: 5/12 V digital encoder interface module slot GP-ENC: analog encoder interface module slot GP-ENC: resolver encoder interface module |
| exchange mode | half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| relay output number | 3 |
| relay output type | configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles configurable relay logic R2: sequence relay NO electrical durability 100000 cycles configurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| input compatibility | STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI1...DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 |
| refresh time | relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| type of polarization | no impedance for Modbus serial |
| power range | 30-50 kW at 380-440 V 3 phases 30-50 kW at 480-500 V 3 phases |
| motor starter type | variable speed drive |
| permissible temporary current boost | 1.5 x In during 60 s (heavy duty) 1.2 x In during 60 s (normal duty) |
| input/output type | logic output DQ-: 0-1 kHz, <= 30 V DC, 100 mA logic output DQ+: 0-1 kHz, <= 30 V DC, 100 mA programmable as pulse output DQ+: 0-30 kHz, <= 30 V DC, 20 mA |
| Okolje | |
| Temperatura okoliškega zraka za delovanje | 50-60 °C with current derating (heavy duty) 40-60 °C with current derating (normal duty) -15-50 °C without current derating (heavy duty) -15-40 °C without current derating (normal duty) |
| IP stopnja zaščite | IP20 |
| Stopnja onesnaženosti | 2 conforming to EN/IEC 61800-5-1 |
| Temperatura okoliškega zraka za skladiščenje | -40-70 °C |
| relative humidity | 5-95 % without condensation conforming to IEC 60068-2-3 |
| Nadmorska višina delovanja | <= 1000 m without 1000...4800 m with current derating 1 % per 100 m |
| Certifikati izdelkov | CSA UL REACH TÜV |
| Standardi | UL 508C EN/IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
| Odporno proti udarcu | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Odpornost proti vibracijam | 1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6 |
| Elektromagnetna kompatibilnost | electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| environmental characteristic | chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 |
| operating position | vertical +/- 10 degree |
| marking | CE |
| noise level | 63.5 dB conforming to 86/188/EEC |
| insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| power dissipation in W | natural convection: 90 W at 380 V, switching frequency 4 kHz (heavy duty) forced convection: 796 W at 380 V, switching frequency 4 kHz (heavy duty) natural convection: 105 W at 380 V, switching frequency 4 kHz (normal duty) forced convection: 943 W at 380 V, switching frequency 4 kHz (normal duty) |
| volume of cooling air | 240 m3/h |
| isolation | between power and control terminals |
